ECUnleashed: Special Pricing Until February 3rd!

2 Wheel DynoWorks · 01-25-2012, 01:12 PM

Thank You For Attending The ECUnleashed/2 Wheel DynoWorks Booth At The Seattle Motorcycle Show!!

To Show Our Gratitude we have put together a Limited Time
SPECIAL PRICING PROMO

ALL Japanese Motorcycle's are $399 *Regularly $449
ALL Ducati's are $499 *Regularly $549

This Special PROMO Expires February 3rd!

Reach Out to Nels Directly:

2 Wheel DynoWorks
12556 120th Ave NE #323
Kirkland , Wa 98034
Phone: 425-269-5332
Email: 2wheeldynoworks@gmail.com

ECUnleashed: The Company
ECUnleashed Tuning Technology is committed to staying one step ahead in the world of motorsports tuning by developing and distributing the most extensive line of ECU performance Tune Files for motorcycles, cars, watercraft and snowmobiles.
Through our ever expanding network of knowledgeable Tuning Centers around the world, we are able to offer new technology, optimum performance results, and quality customer service to an international community of motorsport enthusiasts.
Removing Restrictions and Perfecting the Tune……..

ECU Modifications – (Optional per customer request and application)
* Remove Factory Timing Retard
* Remove Throttle Restrictions
* Increased Idle
* Increased Rev Limit
* Remove Speed Limiters (Gear Dependent)
* Reduce Excessive Engine Braking/Improved Deceleration
* Improved Throttle Control & Reaction
* Remove Injector Shut-Off on Deceleration
* Eliminate Factory “Error codes” (ex. exhaust valve, steering damper)
* Improved Fuel Maps
* Improved Ignition Maps
* Injector Phasing Adjustment
* Velocity Stack Switching Adjustment (Variable Stacks Only)
* Race Fuel Mapping Accommodations

KNanthrup · 01-25-2012, 02:00 PM

Can't wait to get this done!

Nels, are these done in-house yet or are they still requiring shipment of the ECU?

goslow · 01-25-2012, 02:18 PM

Is dyno time required after the ECU flash?

Do you recommend running a Power Commander along with the ECUunleashed?

Frill-dog · 01-25-2012, 02:58 PM

Nels, have you posted the dynos from the last batch?

Thanks
Dillon

nakedinseattle · 01-25-2012, 11:18 PM

Originally Posted by KNanthrup

Can't wait to get this done!

Nels, are these done in-house yet or are they still requiring shipment of the ECU?

if you are referring to hondas, still shipped out i believe

Originally Posted by goslow

Is dyno time required after the ECU flash?

Do you recommend running a Power Commander along with the ECUunleashed?

dyno time not required after flash. power commander always recommended for making those fine tune adjustments to fuel to perfect them for your individual bike.

Originally Posted by Frill-dog

Nels, have you posted the dynos from the last batch?

Thanks
Dillon

which batch are you referring to?

Frill-dog · 01-26-2012, 08:20 AM

Originally Posted by nakedinseattle

which batch are you referring to?

The batch of CBR ecu's from this last december's run...

Pvster · 01-26-2012, 08:38 AM

any ecu flashes available for a honda 919 by any chance????

2 Wheel DynoWorks · 01-27-2012, 09:00 PM

The first batch of CBR flashes will return Monday and get on the dyno this next week. I will make sure to psot graphs.


01-25-2012, 01:12 PM	#1
2 Wheel DynoWorks Nels Joined: Jun 2009 From: Kirkland, Wa I Ride: 2007 R1, 2003 Fat Boy	ECUnleashed: Special Pricing Until February 3rd! Thank You For Attending The ECUnleashed/2 Wheel DynoWorks Booth At The Seattle Motorcycle Show!! To Show Our Gratitude we have put together a Limited Time SPECIAL PRICING PROMO ALL Japanese Motorcycle's are $399 Regularly $449 ALL Ducati's are $499* Regularly $549 This Special PROMO Expires February 3rd!* Reach Out to Nels Directly: 2 Wheel DynoWorks 12556 120th Ave NE #323 Kirkland , Wa 98034 Phone: 425-269-5332 Email: 2wheeldynoworks@gmail.com ECUnleashed: The Company ECUnleashed Tuning Technology is committed to staying one step ahead in the world of motorsports tuning by developing and distributing the most extensive line of ECU performance Tune Files for motorcycles, cars, watercraft and snowmobiles. Through our ever expanding network of knowledgeable Tuning Centers around the world, we are able to offer new technology, optimum performance results, and quality customer service to an international community of motorsport enthusiasts. Removing Restrictions and Perfecting the Tune…….. ECU Modifications – (Optional per customer request and application) * Remove Factory Timing Retard * Remove Throttle Restrictions * Increased Idle * Increased Rev Limit * Remove Speed Limiters (Gear Dependent) * Reduce Excessive Engine Braking/Improved Deceleration * Improved Throttle Control & Reaction * Remove Injector Shut-Off on Deceleration * Eliminate Factory “Error codes” (ex. exhaust valve, steering damper) * Improved Fuel Maps * Improved Ignition Maps * Injector Phasing Adjustment * Velocity Stack Switching Adjustment (Variable Stacks Only) * Race Fuel Mapping Accommodations __________________ Follow PNW Riders on Facebook and Twitter


01-25-2012, 02:00 PM	#2
KNanthrup Chicken Strips Joined: Jul 2008 From: Issaquah, WA I Ride: '09 CBR1000RR	Can't wait to get this done! Nels, are these done in-house yet or are they still requiring shipment of the ECU? __________________ Follow PNW Riders on Facebook and Twitter


01-25-2012, 02:58 PM	#4
Frill-dog Joined: Aug 2005 From: Tigard, Oregon I Ride: ≠	Nels, have you posted the dynos from the last batch? Thanks Dillon __________________ Follow PNW Riders on Facebook and Twitter


01-26-2012, 08:38 AM	#7
Pvster Licensed Joined: Jan 2011 From: Portland, Oregon I Ride: 2002 honda 919/cb900f/hornet: the REAL naked bike....	any ecu flashes available for a honda 919 by any chance???? __________________ Follow PNW Riders on Facebook and Twitter


01-27-2012, 09:00 PM	#8
2 Wheel DynoWorks Nels Joined: Jun 2009 From: Kirkland, Wa I Ride: 2007 R1, 2003 Fat Boy	cbr flashes The first batch of CBR flashes will return Monday and get on the dyno this next week. I will make sure to psot graphs. __________________ Follow PNW Riders on Facebook and Twitter


01-25-2012, 02:18 PM	#3
goslow Shredder Joined: Apr 2006 From: Auburn & Longview I Ride: '06 FZ1 & '06 DRZ SM	Is dyno time required after the ECU flash? Do you recommend running a Power Commander along with the ECUunleashed? __________________ Follow PNW Riders on Facebook and Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode