PNW Riders

Ed Who? · 07-16-2009, 08:04 AM

This Saturday July 18th EDR Performance is hosting a FREE DYNO TEST DAY

Many people have always wondered what their bike makes for power or how well their bike is running. We get the same thing every time "i really wanna see how my bike runs but dont wanna spend the $100" or "i had it mapped/downloaded a map and think its not great" Well now you can find out for FREE! We know times are tight for everyone and we wanna help out by offering $100 dyno test runs for no charge.

This Saturday from 10am till 4pm EDR Performance will run your bike on the dyno for FREE! No strings attached. Bring your bike...we will look it over real quick (ie no leaks, tire plugs, chains falling off) and then put on our state of the art Dynojet 250i inside our INC dyno room...then run it for best of 3-4 runs. We will give you print out of horsepower and air fuel (no tq due to time required to get pick up signal on some bikes)

Think about it, you and your buddy both have GSXR1000's...but which one is stronger? which one runs better?? Find out!

Racers who bring in their race bikes we will go even further and put on a std dyno street tire on your bike for NO CHARGE so you can see just how well your race bike is running! Curious to see how well your race bike really is mapped? Wanna see how the POWER stacks up against our huge data base of race bikes? *Racers/Race bike dyno numbers will not be shown/posted/discussed outside of dyno unless allowed so by said owner.

We will have tons of free drinks and the weather looks AMAZING at 80 degrees (much cooler than this weeks 90+) Come check out the shop, meet the crew (new addition Corie even) hang out with other riders, shot the shit, and enjoy bikes for what they are...FUN!

Hope to see ya there.

EDR Performance
1319 NW Johnson St
Portland, OR 97209
503.222.RACE
T-F 10-6:30
SAT 10-4:30

*MODS on PNW PLEASE dont take down! This is something for EVERYONE and FUN and FREE! Please note I have tried countless times to become a site sponsor but all pm's to beansbaxter have been left unreplied too. So please contact me if you have info on us becoming a site sponsor for future things. thanks much. I have emailed ADMIN@pnwriders . com just again this am...i can paypal the $$ for site sponsors once someone actually replies to me instead of just taking threads down. This is just an announcement for a free dyno test for everyone.

Thaloc · 07-16-2009, 08:09 AM

Wish I was less than 4hrs away....=(

Nicegy525 · 07-16-2009, 11:43 AM

in before deletion!

:

Wish I could be there but sadly ill be working...

DullJack · 07-16-2009, 12:38 PM

Probably going to be deleted anyway...but, if I'm not in a plane heading overseas I will most definitely be there on Sat

SpinCycle · 07-16-2009, 12:53 PM

Maybe....

FZ6Rider · 07-16-2009, 12:57 PM

This is awesome

Will try to make it.

motostunter · 07-16-2009, 01:26 PM

As interested as I am to find out what my 636 is putting out, I have to work at 11 in Hillsboro, so sorry, I can't make it. Such a shame.

Lynk · 07-16-2009, 01:37 PM

Sounds like fun, Eric. Mods, please let it be.

Ed Who? · 07-16-2009, 03:26 PM

Many have asked about time... JUST SHOW UP FELLA'S! No need for appointments. Ill have dyno running by 10:30am (no earlier) and we will go till at least 4pm.

We will do awards for the best

-Scooter any cc (only if we can fit due to short wheelbase)

-Single any cc

-Twin up to 750cc
-Twins 751cc+

-Triple any cc

-4 cylinder up to 600cc
-4 cylinder 600-800cc
-4 cylinder OPEN

-Worst tuned/mapped bike

$20 Gift Certificates at EDR for the best of these classes

:thumb:

Spec · 07-16-2009, 03:45 PM

Eric, your place is going to be PACKED. If I get up and out the door early I may bring the 636 down, though it was just dynoed recently elsewhere, free never hurts. Plus I can drool over that Tuono a little more.

If for some reason this gets taken down, PM me and I'll post it.

Ed Who? · 07-16-2009, 04:09 PM

Thanks man! I think mods are ok since Jafar (sp?) and i have been finalizing the site sponsorship/details today and once i get a $ amount, they will have my hard earned $$

Thanks again guys. I havent posted a lot on here cause most the time it was taken down as deemed "advertising" and per their request i have tried to honor that...now it seems Jafar (again sp may be off, apologize) is rolling with it and helping me out! Thanks everyone again and cant wait to see ya all and meet some of you

ERIC

gilberjj · 07-16-2009, 04:26 PM

If they take this down, they suck! Sounds like tons of fun! I will have to see what I'm doing on Saturday.

galenernest · 07-16-2009, 04:26 PM

I'm a maybe if I can get there in time. Question: When you dyno a bike (like mine, '96 yzf 600r) do you rev it up to redline? My bike technically hits redline at 13k. I was running it up to redline consistently at PIR (even though it probably didn't have much power after 11k or so, but hey I'm a newb) until it blew a con rod bearing. So, if I bring it into your shop, are you going to run it up all the way and blow a con rod bearing?!?

Or just until it starts to drop power? Or just below redline?

Anyways, I had a coupon for a free dyno at EDR from last year but I lost it... so now's my chance

hath600RR · 07-16-2009, 04:34 PM

hey Eric sounds like its gonna be packed on saturday, thanks again for hooking my bike up and doing an awesome job. sorry I cant make it, I will be out of town maybe next time lol laters Hath

Lynk · 07-16-2009, 06:43 PM

galenernest, just ask Eric, or whomever is running the dyno to cut at a particular engine speed. If your bike has a tach, it'll be easy enough. If your bike blows-up, you've got a strong chance at winning "Worst Tune."

Lucid Dreamer · 07-16-2009, 07:52 PM

alright, i'll be there

james1300 · 07-16-2009, 09:15 PM

Damn! Not enough notice!

skistud17 · 07-16-2009, 09:57 PM

may have to make the trip up there

ddonacazx12 · 07-16-2009, 10:06 PM

DOH!!!!

I'll be in Sea-Tac this weekend for the nationals...

But I am gonna get the 12 down to EDR for a proper map, one of these days.... honest I am.

For those who have never been, it's worth the downtown traffic. All kinds on cool stuff on the walls to drool over, great guys with a ton of know-how, etc... well worth the drive.

Spec · 07-16-2009, 10:29 PM

Originally Posted by galenernest

I'm a maybe if I can get there in time. Question: When you dyno a bike (like mine, '96 yzf 600r) do you rev it up to redline? My bike technically hits redline at 13k. I was running it up to redline consistently at PIR (even though it probably didn't have much power after 11k or so, but hey I'm a newb) until it blew a con rod bearing. So, if I bring it into your shop, are you going to run it up all the way and blow a con rod bearing?!?

Or just until it starts to drop power? Or just below redline?

Anyways, I had a coupon for a free dyno at EDR from last year but I lost it... so now's my chance

They run it to redline, and yea I've seen bikes blow on dynos before.

You can ask them to stop at 11k or whatev, but you'll not be getting an accurate hp rating.

ddonacazx12 · 07-16-2009, 10:39 PM

Originally Posted by Spec

They run it to redline, and yea I've seen bikes blow on dynos before.

You can ask them to stop at 11k or whatev, but you'll not be getting an accurate hp rating.

his bike probably makes peak power at 10-10.5 anyhow...

Ed Who? · 07-17-2009, 07:29 AM

guys if the bike wont rev past or make power up over say 11k whats the point? most know how a dyno and its operator work...its not just start it and pin it. *knock on wood* in over 16 years of dyno'ing i have never lost a bike yet...well ok we did burn up a RC car once trying it

Ed Who? · 07-17-2009, 03:21 PM

UPDATED: We just went and throw shoulders with 1, 000,000 people in 100deg weather and fought traffic to bring you guys and gals refreshments for tomorrow.

Coke, Diet Coke, Sprites, Waters, Cookies, Chips/Salsa...etc

I get back to the shop and the owner of VISO Energy drinks brought us by a ton of product to give out! SO come early for a FREE Viso (several flavors, some caffeine free) Huge thanks to Viso for this!

See you guys tomorrow!

Lucid Dreamer · 07-17-2009, 03:50 PM

woohoo..

Ed Who? · 07-18-2009, 09:24 AM

WHOO HOO>... HUGE Thanks to Redbull too.. we got tons of free redbulls too...thou a few of our seattle guys just showed up, so they most likely will be gone soon... haha..jk.

Ill try to update dyno's while on the dyno between bikes...gotta love having wi-fi INSIDE the dyno room!

Should be huge crowd and tons of fun today!!!

Lucid Dreamer · 07-18-2009, 11:59 AM

Hey Eric, it was nice to meet you and to check out your shop, pretty cool place and the area, thanks for the Dyno run

German · 07-18-2009, 12:22 PM

A big thanks and kudos to the entire EDR team. As always, they are exceptionally friendly, insightful, and professional. Excellent execution of a very generous dyno day!

Eric will probably post results but here is mine:
2006 GSX-R 600 (black) - 109.67 WHP (4th gear run)
Standard Correction Factor with 5% smoothing

Again, thank you for the hospitality and generosity! Much appreciated.

Ed Who? · 07-18-2009, 04:44 PM

HUGE Thanks to Viso, Redbull, Costco, My crew and all you that made it a great day! HUGE turnout and we ended at 47 bikes... thanks again everyone...time for beer now

The overall winner! Sorry no names and they came in at end of day when no crowd...gotta keep the competition guessing!

It is a SUPERSPORT built EDR bike. 1000cc. Races west of Mississippi Enjoy.


07-16-2009, 08:04 AM	#1
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	Free dyno test day! This Saturday July 18th EDR Performance is hosting a FREE DYNO TEST DAY Many people have always wondered what their bike makes for power or how well their bike is running. We get the same thing every time "i really wanna see how my bike runs but dont wanna spend the $100" or "i had it mapped/downloaded a map and think its not great" Well now you can find out for FREE! We know times are tight for everyone and we wanna help out by offering $100 dyno test runs for no charge. This Saturday from 10am till 4pm EDR Performance will run your bike on the dyno for FREE! No strings attached. Bring your bike...we will look it over real quick (ie no leaks, tire plugs, chains falling off) and then put on our state of the art Dynojet 250i inside our INC dyno room...then run it for best of 3-4 runs. We will give you print out of horsepower and air fuel (no tq due to time required to get pick up signal on some bikes) Think about it, you and your buddy both have GSXR1000's...but which one is stronger? which one runs better?? Find out! Racers who bring in their race bikes we will go even further and put on a std dyno street tire on your bike for NO CHARGE so you can see just how well your race bike is running! Curious to see how well your race bike really is mapped? Wanna see how the POWER stacks up against our huge data base of race bikes? Racers/Race bike dyno numbers will not be shown/posted/discussed outside of dyno unless allowed so by said owner. We will have tons of free drinks and the weather looks AMAZING at 80 degrees (much cooler than this weeks 90+) Come check out the shop, meet the crew (new addition Corie even) hang out with other riders, shot the shit, and enjoy bikes for what they are...FUN! Hope to see ya there. EDR Performance 1319 NW Johnson St Portland, OR 97209 503.222.RACE T-F 10-6:30 SAT 10-4:30 MODS on PNW PLEASE dont take down! This is something for EVERYONE and FUN and FREE! Please note I have tried countless times to become a site sponsor but all pm's to beansbaxter have been left unreplied too. So please contact me if you have info on us becoming a site sponsor for future things. thanks much. I have emailed ADMIN@pnwriders . com just again this am...i can paypal the $$ for site sponsors once someone actually replies to me instead of just taking threads down. This is just an announcement for a free dyno test for everyone. __________________ Follow PNW Riders on Facebook and Twitter Last edited by Ed Who?; 07-16-2009 at 08:12 AM..


07-16-2009, 08:09 AM	#2
Thaloc Zone Head Joined: Jan 2009 From: Wenatchee, WA I Ride: Buell XB12R	Wish I was less than 4hrs away....=( __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 11:43 AM	#3
Nicegy525 Zone Head Joined: Feb 2008 From: Portland, Oregon I Ride: '07 GSXR-750	in before deletion! : Wish I could be there but sadly ill be working... __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 12:38 PM	#4
DullJack Endorsed Joined: Jul 2009 From: Vancouver, WA I Ride: I can't, I'm stuck in the sand, bleh!	Probably going to be deleted anyway...but, if I'm not in a plane heading overseas I will most definitely be there on Sat __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 12:53 PM	#5
SpinCycle Pit Crew Joined: Dec 2007 From: Eugene, OR I Ride: 08 B King	Maybe.... __________________ Follow PNW Riders on Facebook and Twitter

PNW Riders

About PNW Riders

Advertising


07-16-2009, 12:57 PM	#6
FZ6Rider Streetfighter Joined: Aug 2008 From: Woodburn, OR I Ride: wrecked bikes!	This is awesome Will try to make it. __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 01:26 PM	#7
motostunter Zone Head Joined: Aug 2006 From: Portland, Or (Bethany) I Ride: 03 636	As interested as I am to find out what my 636 is putting out, I have to work at 11 in Hillsboro, so sorry, I can't make it. Such a shame. __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 01:37 PM	#8
Lynk Superbiker Joined: Dec 2005 From: Bellevue, WA I Ride: a 2006 H-D XL1200C, 2005 Suzuki DRZ-400SM, 1997 Kawa Ninja 500R, and 2003 Yamaha YZF-R6 (racebike).	Sounds like fun, Eric. Mods, please let it be. __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 03:26 PM	#9
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	Many have asked about time... JUST SHOW UP FELLA'S! No need for appointments. Ill have dyno running by 10:30am (no earlier) and we will go till at least 4pm. We will do awards for the best -Scooter any cc (only if we can fit due to short wheelbase) -Single any cc -Twin up to 750cc -Twins 751cc+ -Triple any cc -4 cylinder up to 600cc -4 cylinder 600-800cc -4 cylinder OPEN -Worst tuned/mapped bike $20 Gift Certificates at EDR for the best of these classes :thumb: __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 03:45 PM	#10
Spec State Farm Joined: Dec 2005 From: Happy Valley, OR I Ride: race-prepped '05 ZX6-R, '83 Yamaha XS400	Eric, your place is going to be PACKED. If I get up and out the door early I may bring the 636 down, though it was just dynoed recently elsewhere, free never hurts. Plus I can drool over that Tuono a little more. If for some reason this gets taken down, PM me and I'll post it. __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 04:09 PM	#11
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	Thanks man! I think mods are ok since Jafar (sp?) and i have been finalizing the site sponsorship/details today and once i get a $ amount, they will have my hard earned $$ Thanks again guys. I havent posted a lot on here cause most the time it was taken down as deemed "advertising" and per their request i have tried to honor that...now it seems Jafar (again sp may be off, apologize) is rolling with it and helping me out! Thanks everyone again and cant wait to see ya all and meet some of you ERIC __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 04:26 PM	#12
gilberjj Zone Head Joined: Feb 2008 From: Olympia, WA I Ride: Kawasaki zx14	If they take this down, they suck! Sounds like tons of fun! I will have to see what I'm doing on Saturday. __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 04:26 PM	#13
galenernest Zone Head Joined: Jun 2008 From: Vancouver, WA I Ride: year 'round	I'm a maybe if I can get there in time. Question: When you dyno a bike (like mine, '96 yzf 600r) do you rev it up to redline? My bike technically hits redline at 13k. I was running it up to redline consistently at PIR (even though it probably didn't have much power after 11k or so, but hey I'm a newb) until it blew a con rod bearing. So, if I bring it into your shop, are you going to run it up all the way and blow a con rod bearing?!? Or just until it starts to drop power? Or just below redline? Anyways, I had a coupon for a free dyno at EDR from last year but I lost it... so now's my chance __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 04:34 PM	#14
hath600RR Zone Head Joined: Aug 2008 From: hillsboro OR usa I Ride: on the tank of my 600RR	hey Eric sounds like its gonna be packed on saturday, thanks again for hooking my bike up and doing an awesome job. sorry I cant make it, I will be out of town maybe next time lol laters Hath __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 06:43 PM	#15
Lynk Superbiker Joined: Dec 2005 From: Bellevue, WA I Ride: a 2006 H-D XL1200C, 2005 Suzuki DRZ-400SM, 1997 Kawa Ninja 500R, and 2003 Yamaha YZF-R6 (racebike).	galenernest, just ask Eric, or whomever is running the dyno to cut at a particular engine speed. If your bike has a tach, it'll be easy enough. If your bike blows-up, you've got a strong chance at winning "Worst Tune." __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 07:52 PM	#16
Lucid Dreamer Endorsed Joined: May 2009 From: Camas I Ride: a Street Triple R	alright, i'll be there __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 09:15 PM	#17
james1300 Track School Dazed Joined: Oct 2005 From: CENTRAL I Ride: When I can	Damn! Not enough notice! __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 09:57 PM	#18
skistud17 Streetfighter Joined: May 2007 From: mo mo land I Ride: 2008 GSX-R 600	may have to make the trip up there __________________ Follow PNW Riders on Facebook and Twitter


07-16-2009, 10:06 PM	#19
ddonacazx12 MotoGP Contender Joined: Jul 2007 From: Camas, Washington I Ride: 05 zx12r	DOH!!!! I'll be in Sea-Tac this weekend for the nationals... But I am gonna get the 12 down to EDR for a proper map, one of these days.... *honest I am. For those who have never been, it's worth the downtown traffic. All kinds on cool stuff on the walls to drool over, great guys with a ton of know-how, etc... well worth the drive. __________________ Follow PNW Riders on Facebook and Twitter*


07-17-2009, 07:29 AM	#22
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	guys if the bike wont rev past or make power up over say 11k whats the point? most know how a dyno and its operator work...its not just start it and pin it. knock on wood in over 16 years of dyno'ing i have never lost a bike yet...well ok we did burn up a RC car once trying it __________________ Follow PNW Riders on Facebook and Twitter


07-17-2009, 03:21 PM	#23
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	UPDATED: We just went and throw shoulders with 1, 000,000 people in 100deg weather and fought traffic to bring you guys and gals refreshments for tomorrow. Coke, Diet Coke, Sprites, Waters, Cookies, Chips/Salsa...etc I get back to the shop and the owner of VISO Energy drinks brought us by a ton of product to give out! SO come early for a FREE Viso (several flavors, some caffeine free) Huge thanks to Viso for this! See you guys tomorrow! __________________ Follow PNW Riders on Facebook and Twitter


07-17-2009, 03:50 PM	#24
Lucid Dreamer Endorsed Joined: May 2009 From: Camas I Ride: a Street Triple R	woohoo.. __________________ Follow PNW Riders on Facebook and Twitter


07-18-2009, 09:24 AM	#25
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	WHOO HOO>... HUGE Thanks to Redbull too.. we got tons of free redbulls too...thou a few of our seattle guys just showed up, so they most likely will be gone soon... haha..jk. Ill try to update dyno's while on the dyno between bikes...gotta love having wi-fi INSIDE the dyno room! Should be huge crowd and tons of fun today!!! __________________ Follow PNW Riders on Facebook and Twitter


07-18-2009, 11:59 AM	#26
Lucid Dreamer Endorsed Joined: May 2009 From: Camas I Ride: a Street Triple R	Hey Eric, it was nice to meet you and to check out your shop, pretty cool place and the area, thanks for the Dyno run __________________ Follow PNW Riders on Facebook and Twitter


07-18-2009, 12:22 PM	#27
German Newbie Joined: May 2008 From: Portland I Ride: 2006 GSX-R 600	A big thanks and kudos to the entire EDR team. As always, they are exceptionally friendly, insightful, and professional. Excellent execution of a very generous dyno day! Eric will probably post results but here is mine: 2006 GSX-R 600 (black) - 109.67 WHP (4th gear run) Standard Correction Factor with 5% smoothing Again, thank you for the hospitality and generosity! Much appreciated. __________________ Follow PNW Riders on Facebook and Twitter


07-18-2009, 04:44 PM	#28
Ed Who? Endorsed Joined: Oct 2006 From: Portland, OR I Ride: 96' ZX-7RR & 06' MV Brutale 910	HUGE Thanks to Viso, Redbull, Costco, My crew and all you that made it a great day! HUGE turnout and we ended at 47 bikes... thanks again everyone...time for beer now The overall winner! Sorry no names and they came in at end of day when no crowd...gotta keep the competition guessing! It is a SUPERSPORT built EDR bike. 1000cc. Races west of Mississippi Enjoy. __________________ Follow PNW Riders on Facebook and Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode