Reply
 
LinkBack Thread Tools Display Modes
Old 06-15-2012, 08:09 PM   #1
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
This is gonna cost me!
Ok, instead of being pissed that my bike is down, I'm gonna try to look at this as a opportunity "to meet new people." So here's the deal,

Last Friday I bought a new bike. It's a '00 Yamaha R6. It's got 22,xxx miles on it. Since I bought it, I haven't touched a car. LOL. I've been riding everywhere. Went on a ride yesterday out hwy 20. Noticed that I was having trouble shifting. I thought that maybe I was missing a shift because I had new gear that hadn't been broken in yet. I had one of the guys in the group take it for a quick spin to see what they thought. He stated that it was indeed missing gear and not shifting properly. He suggested it that it might be the shift forks (proper term?). And he tried to explain how they work. I'm a newbie, and didn't understand much of it, but the basic concept is that the shift forks help slide the gears in and out of place to engage/disengage as you cycle through the gears (did I understand that right?).

Sooooooooooooooooo...... I took the bike to the shop this morning. They said in their best guess they think it is probably 1st, 2nd, and maybe 3rd gears need to be replaced. As well as the all 3 shift forks. BUT, they can't tell me for sure until they drop the motor, crack it open and look at the transmission. Not a big deal, I thought. EXCEPT, they want to charge me 1,300 dollars just to drop the motor and open it up. Once I pay that 1,300 for them to open it up THEN they will tell me how much it's gonna cost to fix and what needs to be replaced.

Does anyone on here know how to work on R6 motors/transmission that is willing to help me? I can tow/carry/haul/push/pull the bike to wherever you are. I can pay for time, and all parts and shipping. I'll also pay for beer and pizza. And if it's not to much of a hassle, maybe you can show me what is what, so I can learn about my bike and not have to rely on shops raping me to keep my bike running. Long and short is, I'm hoping someone can either repair/rebuild the problem or do a motor swap for me cheaper than a shop, and can show me what's going on as they do it so I can learn about it and be more knowledgeable about bikes (my bike in particular). Like I said, I'll cover parts, labor, shipping, beer, and pizza (or burgers.) I just want to get it running soon so I can enjoy riding this season. I don't want to spend another season bike-less.

HELP!!!!

__________________
Follow PNW Riders on Facebook and Twitter
 

Old 06-15-2012, 08:14 PM   #2
Moto2 Contender
courier11sec's Avatar
 
Joined: Sep 2008
From: where they don't have lawns.

I Ride: on the storm.
I bet if you look around a bit you can find a used engine and transmission for well less than that.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-15-2012, 08:15 PM   #3
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
Any suggestions on sites to check out would be greatly appreciated.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-15-2012, 09:37 PM   #4
Endorsed
begsxr_600's Avatar
 
Joined: Sep 2008
From: seattle,WA

I Ride: gsxr k7
“ Quote:
Originally Posted by 2 dizzy View Post
Any suggestions on sites to check out would be greatly appreciated.
you can get a whole transmission with shift forks from ebay for less than $200, and Mike Castro ( fuzzymoto) can replace it for you for a very reasonable price. he replace the shift forks on one of my bikes, and he charged me about half of what that other place is charging you.

here ya go!
http://www.ebay.com/itm/99-00-01-02-...ht_7616wt_1189

Mike's phone # 206 235 5485

good luck!

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-15-2012, 09:53 PM   #5
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
LOL! That's funny. You're the second guy today to mention Fuzzy. My brother is trying to help me get my bike running again, and someone he was talking to suggested getting ahold of Fuzzy. I tried calling him a few times, but kept getting voicemail.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-15-2012, 10:01 PM   #6
Endorsed
begsxr_600's Avatar
 
Joined: Sep 2008
From: seattle,WA

I Ride: gsxr k7
try texting him, he answers faster via text. or you can probably find him this weekend at Pacific raceways because is race weekend.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-15-2012, 10:03 PM   #7
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
Thanks for the advice, and the referall. I'll get ahold of him if this other lead falls through.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-16-2012, 06:59 AM   #8
Shredder
 
Joined: Feb 2011
From: Tacoma, WA

I Ride: 2001 RC-51
Hate buying bikes. Never know if the squid who owned it prior road the tranny / motor into the ground ..

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-16-2012, 11:11 AM   #9
Novice Racer
RC51's Avatar
 
Joined: Mar 2008
From: Everett, WA

I Ride: Motorcycle
I take it you didn't ride the bike before you bought it? Seems like something you would have noticed right away.


Just remember that while it may seem expensive to just look at it, mechanics don't work for free. It does require actual work to tear down a transmission and see what the problem is. Some things are easily diagnosed without opening anything up, some things aren't. Yes, dealerships are usually more expensive for service than independent shops, but they usually also have higher overhead. Don't jump to the conclusion that they are "raping" you. You asked for quote on tearing your bike down to find the problem, not to swap engines or transmissions. An independent shop is of course going to give you a different quote for different work. Keep that in mind when you try to compare the costs.

It is good that you want to learn how to do stuff on your own, I would much rather learn how to do something than pay someone else to do it. Just rember that you are paying for experience when you do go to a shop, experience you currently don't have. Paying a shop also gives you the ability to hold them accountable for the work done. Having a friend or forum member help you out for beer and pizza negates that accountability.

Best of luck with the repairs. Having a broke bike sucks. Both of my bikes are in pieces at the moment.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-16-2012, 02:22 PM   #10
Dee-von White
Deven's Avatar
 
Joined: Jan 2007
From: Vancouver, Washington

I Ride: R6 track, SV650S street
Did you buy it from a Russian kid named Ivan...

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-16-2012, 02:54 PM   #11
Chicken Strips
rmorten's Avatar
 
Joined: Aug 2010
From: Federal Way, WA

I Ride: in a vanpool
This might seem silly... Have you changed the oil since you bought it?

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-16-2012, 03:18 PM   #12
Knee Dragger
tunus's Avatar
 
Joined: Jan 2007
From: Beaverton, OR / Bellevue, WA

I Ride: 2000 Triumph Sprint ST and 03 Yamaha WR450F (plated)
Call Adrian at shinysideup up from you in Everett. He'll be able to help you out for a much more reasonable price.

Gear slipping is a very common problem for the first gen R6/600R motors. Did you test ride it before buying?

Another option is swapping the entire engine. Keep an eye on ebay.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-16-2012, 10:51 PM   #13
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
yes it was test rode. My brother took it out and around before I bought it. It ran great all week. I bought it friday evening, and was promptly out riding it on Saturday. Went for a ride with my brother and his friend on Sunday. Did some riding monday and tuesday also. I've pretty much been riding non-stop since I bought the bike. The tranny just went out on Thursday. It had been working fine before that. I'd been out to monroe, and then down to auburn. I've been to Kent, Pike's place, even tacoma. It had been running fine up til I started riding on Thursday morning. It just wasn't working right. I did get it home. And now I have someone looking at it. My brother did all the "check this, this and this" stuff before I bought it. Made sure vins were right, made sure paper work was right. He checked the fluids and everything. He was pretty thorough (i thought) before he agreed it'd be a good bike to get some experience on. I wasn't upset at the price for the diagnostic, by itself. What upset me was that the shop told me they could tear it down, replace the parts, and have it back together and worse case scenerio it would run me about 2,500. Then it was gonna cost me about 1,500 just to order parts if (worst case) I had to replace the transmission. Then when I talked to my brother to get his opinion, he stopped by the shop, and they told him it would cost 1,200 just to take the motor apart and find out how much it was gonna cost to fix, and told him it would probably run about 3,500. I just feel like the amount keeps changing everytime I talk to them. So I decided to get on here and see if anyone knew how to work on them. Hoping to find some less expensive than the (multiple) estimates of 2,500 - 3,500 dollars. Plus if I found someone on here to work on it, there is always the chance that they'd be willing to show me and teach me so I would know more in the future. I don't want to just ride a bike, I want to "know" my bike and how it works. That way when something doesn't work, i can find a good starting point. Right now, all I can do is say "it makes this sound and does this thing" Makes me feel stupid and bike-retarded. So I wanna learn. But I did get some good referalls and have someone looking at my bike. So hopefully I'll know what it's gonna cost, and what is wrong, soon. And hopefully it'll be worth fixing so I can go riding this season.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-17-2012, 08:10 PM   #14
Moderator
Grantizzle's Avatar
 
Joined: Feb 2008
From: Mill Creek, Wa

I Ride: slower than you with a bigger grin!
“ Quote:
Originally Posted by tunus View Post
Call Adrian at shinysideup up from you in Everett. He'll be able to help you out for a much more reasonable price.

Gear slipping is a very common problem for the first gen R6/600R motors. Did you test ride it before buying?

Another option is swapping the entire engine. Keep an eye on ebay.
for Adrian. just be aware he only accepts cash.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-18-2012, 02:59 PM   #15
DGA
Moderator
DGA's Avatar
 
Joined: Jun 2007
From: Portland, Oregon

I Ride: naked
$1300 is rape just to diagnose something, even if it's in the transmission. It equates to around 15 hours of labor at dealer hourly rates...which is again is rape. It's your money, shop around till you find a reasonably priced place that will stand behind their work.

Parts alone will cost you a good chunk for new. Figure between $300 - $500 just for the forks. You can take a gamble with the used parts, but going that deep into the engine you are seriously taking a risk of doing the work twice.

Best thing to do is find someone who's experienced enough to do it. This is something that you don't want to do as your first thing, if it's your first time working on engines. Take the engine out and put it back in yourself, you can do that, which will save you some labor $$$.

Good luck.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-19-2012, 11:28 AM   #16
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
thanks for all the great advice guys. I found someone that's working on the bike now. And the whole price for beginning to end is hundreds cheaper than the "diagnostic" the shop was gonna charge me. the benefit of the private shop is also that he's willing to take the time and explain everything to me in basic terms til i have an general understanding. I feel confident with this shop working on my bike. I will post results when I get the bike back. (which is estimated to be mid week next week.)

Diz

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-19-2012, 11:54 AM   #17
Railer
FZ6Rider's Avatar
 
Joined: Aug 2008
From: Wilsonville, OR

I Ride: S1000RR & Track R6
$500 would buy you a motor that could be swapped in a day.
Good luck.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-19-2012, 06:17 PM   #18
Railer
OP
 
Joined: Jul 2009
From: Anywhere I can get to on my bike

I Ride: 2000 GSX-R 750
FZ, I've been looking for a '00 R6 motor, just in case something is terribly wrong that he hasn't found yet. Seems damn near impossible to find. If you find any that are in good shape, please PM and let me know.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-26-2012, 03:42 AM   #19
Newbie
 
Joined: Jun 2012
From: Monroe, Wa

I Ride: 2001 R6
“ Quote:
Originally Posted by 2 dizzy View Post
thanks for all the great advice guys. I found someone that's working on the bike now. And the whole price for beginning to end is hundreds cheaper than the "diagnostic" the shop was gonna charge me. the benefit of the private shop is also that he's willing to take the time and explain everything to me in basic terms til i have an general understanding. I feel confident with this shop working on my bike. I will post results when I get the bike back. (which is estimated to be mid week next week.)

Diz
can you tell me what shop you sent your bike too? i have a 2001 R6 that i would like to have checked out/tuned up.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 06-26-2012, 04:58 AM   #20
Pit Crew
anthonycbr's Avatar
 
Joined: Nov 2009
From: MLT WA

I Ride: 2006 cbr 600 (race bike), 2006 cbr 1000(sold) 2007 cbr 600rr(totaled) 2002 cbrf4i(sold)
Are you phillips brother?

__________________
Follow PNW Riders on Facebook and Twitter
 
Reply

  PNW Riders > PNW Riders > Mechanical & Technical


Thread Tools
Display Modes



/pnwriders @pnwriders PNW Riders RSS Feed