Edrperformance

BigDZX10R · 10-24-2012, 07:26 PM

So,ive heard many good things about Eric and Edr being around the track days from everyone making big power. Last fall i contacted Eric, and brought my 2010 zx10 to him. Yes, ive been slacking on doing a review ....so, finally, here it is.
Eric asked what i was looking for and gave me his opinion and some options. He and his crew did an amazing job and lived up to everything he said he would do. I went with the ss biuld and 2 maps. Dont have the numbers but i do have a copy of the dyno pulls i'll try to post. 180something and 190rwhp.
Kit ecu
kit cams, buckets, timing chain
milled head thinner head gasket
bazazz zfi w/auto tune map switch
attack rear sets
Driven clip ons
motion pro quick turn throttle
full akro ti
attack gp lifters
edr mirror block offs
pair valve mod
air box mod
q2's
integrated the front blinkers into rhe running lights
speigler custom braided brake lines
ecu tune/mapping
bazazz mapping for both pump and u4.4
things i know im forgetting....
I was a bit intimidated to open it up at first...190 rwhp is ALOT! It didnt take long to open it up

i have to give Eric and EDR props...he did an amazing job of tuning! My bike is the smoothest bike ive ever ridden. I have no fear of getting on the gas in a corner. It is amazing to ride! It gives me that first bike grin every time i ride it
The only other person to ride my bike is my friend Jay, he also had Eric tune his gixer, and he was amazed at how had it pulles and how smooth it feels.
I cannot tell you enough good things about Eric and his crew at Edr, great guys and amazing work.
I highly recomend them to anyone wanting to do more with their bike!
Huge thanks to Edr and crew

SiCC · 10-24-2012, 07:51 PM

sweet!

this should have been posted on RRW.

Grantizzle · 10-24-2012, 07:57 PM

Nice. i'd like to see some pics of the dyno chart.

maybe talk to Eric and have him contact beans about becoming a site sponsor so he can advertise?

BigDZX10R · 10-24-2012, 08:46 PM

I'll see if i can get him to post them on my review on the Edr facebook page and post the link...i dont have them on my phone.
Its a very usable monster. The drive out of the corners is insane...it pulls like a freight train!

KNanthrup · 10-25-2012, 05:59 AM

Sounds like some nice goodies on there. Now whatcha gonna do with all that power?

Wyckedan · 10-25-2012, 07:21 AM

Originally Posted by Grantizzle

Nice. i'd like to see some pics of the dyno chart.

maybe talk to Eric and have him contact beans about becoming a site sponsor so he can advertise?

Didn't he get perma-banned a few years ago?

Plummy · 10-25-2012, 07:35 AM

Originally Posted by Grantizzle

Nice. i'd like to see some pics of the dyno chart.

maybe talk to Eric and have him contact beans about becoming a site sponsor so he can advertise?

were you not a mod yet during that shitstorm? or even a member? has it been that long?

getting eric to pay for advertising on this site has been... interesting.

Desvio · 10-25-2012, 07:43 AM

Originally Posted by Plummy

were you not a mod yet during that shitstorm? or even a member? has it been that long?

getting eric to pay for advertising on this site has been... interesting.

Which is really a shame, because the guy isn't actually all that bad at what he does, regardless of what he's like personally.

Desvio · 10-25-2012, 08:01 AM

Infraction handed out, lets keep this on topic.

ninjaofdoom · 10-25-2012, 08:46 AM

Originally Posted by Desvio

Infraction handed out, lets keep this on topic.

For what? lol?

MichelinMan · 10-25-2012, 08:53 AM

Originally Posted by Desvio

Infraction handed out, lets keep this on topic.

Yes, for what exactly?

Sentor · 10-25-2012, 09:00 AM

Based on PNW Facebook, maybe Donny said something?

KNanthrup · 10-25-2012, 09:13 AM

Let's just say Eric does a good job at building bikes... not so good at the whole PR thing... his recent stint over at WMRRA was a nice little reminder.

Nice to hear about this build though... sounds like some quality work. Would love to see the dyno graph.

Cleophus James · 10-25-2012, 09:43 AM

Did someone not like Donny telling the truth about Dorn?

Grantizzle · 10-25-2012, 10:03 AM

Originally Posted by Plummy

were you not a mod yet during that shitstorm? or even a member? has it been that long?

getting eric to pay for advertising on this site has been... interesting.

i was a member, not sure if i was a mod. It was a legit comment. I figured maybe enough time had passed that the hatchet could be buried. apparently not.

Desvio · 10-25-2012, 10:14 AM

Originally Posted by Cleophus James

Did someone not like Donny telling the truth about Dorn?

Would be fine had he griped and bashed Dorn, I have no issue with that, that's what this section is for.

But he insisted on attacking someone else about something not related to the topic in the slightest, earned him an infraction, not my fault he has SO many infractions it earned him a trip to banned camp.

theJrod · 10-25-2012, 10:17 AM

Originally Posted by MichelinMan

Yes, for what exactly?

Question still stands...

Desvio · 10-25-2012, 10:30 AM

Originally Posted by theJrod

Question still stands...

Simple, see (below) explanation.

Originally Posted by Desvio

Would be fine had he griped and bashed Dorn, I have no issue with that, that's what this section is for.

But he insisted on attacking someone else about something not related to the topic in the slightest, earned him an infraction, not my fault he has SO many infractions it earned him a trip to banned camp.

Plummy · 10-25-2012, 10:49 AM

so now that the thread has been derailed to talking about donny...

theJrod · 10-25-2012, 10:51 AM

Originally Posted by Desvio

Simple, see (below) explanation.

Still stands...


10-24-2012, 07:26 PM	#1
BigDZX10R Licensed Joined: May 2009 From: Spokane.Wa I Ride: "10 ZX10 Ninja, 09zx6R, '08 ZX10R sold	Edrperformance So,ive heard many good things about Eric and Edr being around the track days from everyone making big power. Last fall i contacted Eric, and brought my 2010 zx10 to him. Yes, ive been slacking on doing a review ....so, finally, here it is. Eric asked what i was looking for and gave me his opinion and some options. He and his crew did an amazing job and lived up to everything he said he would do. I went with the ss biuld and 2 maps. Dont have the numbers but i do have a copy of the dyno pulls i'll try to post. 180something and 190rwhp. Kit ecu kit cams, buckets, timing chain milled head thinner head gasket bazazz zfi w/auto tune map switch attack rear sets Driven clip ons motion pro quick turn throttle full akro ti attack gp lifters edr mirror block offs pair valve mod air box mod q2's integrated the front blinkers into rhe running lights speigler custom braided brake lines ecu tune/mapping bazazz mapping for both pump and u4.4 things i know im forgetting.... I was a bit intimidated to open it up at first...190 rwhp is ALOT! It didnt take long to open it up i have to give Eric and EDR props...he did an amazing job of tuning! My bike is the smoothest bike ive ever ridden. I have no fear of getting on the gas in a corner. It is amazing to ride! It gives me that first bike grin every time i ride it The only other person to ride my bike is my friend Jay, he also had Eric tune his gixer, and he was amazed at how had it pulles and how smooth it feels. I cannot tell you enough good things about Eric and his crew at Edr, great guys and amazing work. I highly recomend them to anyone wanting to do more with their bike! Huge thanks to Edr and crew __________________ Follow PNW Riders on Facebook and Twitter


10-24-2012, 07:51 PM	#2
SiCC Novice Racer Joined: Apr 2006 From: HighBridge Snohomish, WA I Ride: GSXR600,DRZsm	sweet! this should have been posted on RRW. __________________ Follow PNW Riders on Facebook and Twitter


10-24-2012, 07:57 PM	#3
Grantizzle Joined: Feb 2008 From: Mill Creek, Wa I Ride: slower than you with a bigger grin!	Nice. i'd like to see some pics of the dyno chart. maybe talk to Eric and have him contact beans about becoming a site sponsor so he can advertise? __________________ Follow PNW Riders on Facebook and Twitter


10-24-2012, 08:46 PM	#4
BigDZX10R Licensed Joined: May 2009 From: Spokane.Wa I Ride: "10 ZX10 Ninja, 09zx6R, '08 ZX10R sold	I'll see if i can get him to post them on my review on the Edr facebook page and post the link...i dont have them on my phone. Its a very usable monster. The drive out of the corners is insane...it pulls like a freight train! __________________ Follow PNW Riders on Facebook and Twitter


10-25-2012, 05:59 AM	#5
KNanthrup Shredder Joined: Jul 2008 From: Issaquah, WA I Ride: '09 CBR1000RR. '95 R1100GS	Sounds like some nice goodies on there. Now whatcha gonna do with all that power? __________________ Follow PNW Riders on Facebook and Twitter


10-25-2012, 08:01 AM	#9
Desvio Retired Joined: Mar 2008 From: SE Portland / Bucerias, Nayarit Mx I Ride: 03' CBR1100XX, 84 GL1200A	Infraction handed out, lets keep this on topic. __________________ Follow PNW Riders on Facebook and Twitter


10-25-2012, 09:00 AM	#12
Sentor Novice Racer Joined: Feb 2006 From: Beaverton, OR I Ride: 2008 R6 Race Bike - #52 - And whatever's in the shop!	Based on PNW Facebook, maybe Donny said something? __________________ Follow PNW Riders on Facebook and Twitter


10-25-2012, 09:13 AM	#13
KNanthrup Shredder Joined: Jul 2008 From: Issaquah, WA I Ride: '09 CBR1000RR. '95 R1100GS	Let's just say Eric does a good job at building bikes... not so good at the whole PR thing... his recent stint over at WMRRA was a nice little reminder. Nice to hear about this build though... sounds like some quality work. Would love to see the dyno graph. __________________ Follow PNW Riders on Facebook and Twitter


10-25-2012, 09:43 AM	#14
Cleophus James Chicken Strips Joined: May 2008 From: Ross Ice Shelf I Ride: into town a-whompin an a-whoopin	Did someone not like Donny telling the truth about Dorn? __________________ Follow PNW Riders on Facebook and Twitter


10-25-2012, 10:49 AM	#19
Plummy Retired Joined: Feb 2005 From: lulzercakes Blog Entries: 3 I Ride: asians	so now that the thread has been derailed to talking about donny... __________________ Follow PNW Riders on Facebook and Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode