Reply
 
LinkBack Thread Tools Display Modes
Old 08-31-2012, 12:15 PM   #1
Licensed
Omnivore's Avatar
OP
 
Joined: May 2011
From: Salem, Or.

I Ride: Therefore I AM
Yosh or Teka FI programmer?
Anyone know of a shop or person with a Yosh or Teka FI box around Salem?

Eventually I want to look at and possibly tweak the mapping a bit on my V-Strom. I pretty much know where I want to set it.

Thanks!!

__________________
Follow PNW Riders on Facebook and Twitter
 

Old 08-31-2012, 12:20 PM   #2
Moderator
RedKat600's Avatar
 
Joined: May 2011
From: LaCenter, WA

I Ride: 2003 Copper SV1K
Unless you do the tweaking on a dyno....it's kind of pointless. How can you know where to set it until you get a baseline run?

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 08-31-2012, 12:38 PM   #3
Licensed
Omnivore's Avatar
OP
 
Joined: May 2011
From: Salem, Or.

I Ride: Therefore I AM
“ Quote:
Originally Posted by RedKat600 View Post
Unless you do the tweaking on a dyno....it's kind of pointless. How can you know where to set it until you get a baseline run?
Novels of setting info on the Strom 1k online. You can reset the ecu mapping to 0, That will do a reset to factory mapping on the Yosh. and I'm fairly certain the Teka show's you where its at.

To be honest I don't have any real issue other than 1 hiccup one time at 2900 which is the norm on these. The idle pulses a bit. Coming from the inline 4's mostly I'm kinda used to running in the mid rpm range but these really don't need to be run like that.....well sort of. The caveat being the low rpms are set lean as hell from the factory to pass emissions. So I just wanted to boost up idle in one and two 1.5%, not sure I'll need to do anything else.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 08-31-2012, 12:41 PM   #4
Novice Racer
Sentor's Avatar
 
Joined: Feb 2006
From: Beaverton, OR

I Ride: 2008 R6 Race Bike - #52 - And whatever's in the shop!
EDR can, or Nels (when he's down here) can if you let him know you need to.

There are tons of settings with them you can change, not just fuel/air ratios.

__________________
Follow PNW Riders on Facebook and Twitter
 
Old 08-31-2012, 12:50 PM   #5
Licensed
Omnivore's Avatar
OP
 
Joined: May 2011
From: Salem, Or.

I Ride: Therefore I AM
“ Quote:
Originally Posted by Sentor View Post
EDR can, or Nels (when he's down here) can if you let him know you need to.

There are tons of settings with them you can change, not just fuel/air ratios.
Thanks! How about that pesky governor set at 125 .....

Anyone know one closer let me know, I try to avoid driving up there if at all possible

__________________
Follow PNW Riders on Facebook and Twitter

Last edited by Omnivore; 08-31-2012 at 12:52 PM..
 
Reply

  PNW Riders > Oregon Riders > Portland Region > Salem


Thread Tools
Display Modes



/pnwriders @pnwriders PNW Riders RSS Feed