Empire cycle dyno day june 2-3

Discussion in 'Eastside' started by 2 Wheel DynoWorks, May 10, 2012.


  1. 2 Wheel DynoWorks

    2 Wheel DynoWorks
    Expand Collapse

    526
    1
    268
    Location:
    Kirkland, Wa
    I Ride:
    motorbikes
    All right spokane, we're coming back! We'll be set up at our normal location at Empire Cycle http://www.empire-cycle.com/ from June 1st-3rd. This fills up fast so give us a call to get an appointment, 425-269-5332! Tunes will be slotted for an hour, base runs 30 minutes, so post up what you ride, what you want done, and PM me your name and number to verify your time slot. Every time we do these they are a blast, we love coming to spokane but we're always slammed from dawn til dusk so sign up soon to get your spots reserved! If we can get 15 bikes over the 3 days, full custom tunes will be $150 and follow up tunes and baselines will be $50. I can tune Triumph, KTM, Suzuki without a power commander. I can tune all other engine management including Race ECUs. I can also bring my flash box for ECUnleashed if I have proper notice. Thanks guys! Nels


    [​IMG]

    Time Slots

    Friday
    2pm
    3pm moorespeed fz1 tune
    4pm
    5pm ibeb - hayabusa tune
    6pm Ryan - 06 GSX-R 1000 tune
    7pm stillboredb
    8pm harley

    Saturday
    9am Chris fz1 tune
    10am
    11am Blakestone1 Retune
    12pm 08ZX14RG Retune
    1pm jeff - 05 gsxr 1000 baseline
    2pm Jim from Canada 03 sprint tune
    3pm TamiJean qs adjustment
    4pm gergregg 2010 R1 flash Tune
    5pm

    Sunday
    9am
    10am
    11am
    12pm
    12:30
    1pm
    2pm
    3pm
     
    #1 2 Wheel DynoWorks, May 10, 2012
    Last edited: May 29, 2012
  2. Blakestone1

    Blakestone1
    Expand Collapse

    98
    0
    166
    Location:
    Post Falls, Idaho
    Hook me up for Saturday, any time is fine.
    new pistons means new tune!
     
  3. KevinD

    KevinD
    Expand Collapse
    Moderator
    Staff Member

    13,492
    36
    1,278
    Location:
    Spokane Valley
    I Ride:
    On two wheels
    So you didn't need a whole motor after all?

    And I'll be there to help, if I'm in town.


    KevinD
     
  4. 08ZX14RG

    08ZX14RG
    Expand Collapse

    Slot my 2008 zx14 for sat 12pm...thanks
     
  5. KevinD

    KevinD
    Expand Collapse
    Moderator
    Staff Member

    13,492
    36
    1,278
    Location:
    Spokane Valley
    I Ride:
    On two wheels
    It's amazing who Nels can scare out of the woodwork!


    :)

    KevinD
     
  6. Blakestone1

    Blakestone1
    Expand Collapse

    98
    0
    166
    Location:
    Post Falls, Idaho
    Nope, Just a few pistons, rings, and gaskets. honed the cylinders.
    Top end still looks good.
    I got lucky.
     
  7. 08ZX14RG

    08ZX14RG
    Expand Collapse

    Yep Kevin I've been in hiding...lol..damn that thing they call work!
     
  8. 08ZX14RG

    08ZX14RG
    Expand Collapse

    Yep still in hiding till he get here...lol
     
  9. TamiJean

    TamiJean
    Expand Collapse

    625
    0
    266
    Location:
    Spokane, Wa
    i would be interested in adjusting my quickshifter
     
  10. moorespeed450

    moorespeed450
    Expand Collapse

    22
    0
    56
    Location:
    deer park,wa
    Fri 3pm Eric FZ1 super tune
     
  11. 2 Wheel DynoWorks

    2 Wheel DynoWorks
    Expand Collapse

    526
    1
    268
    Location:
    Kirkland, Wa
    I Ride:
    motorbikes
    getting a lot of phone calls, will start updating spots soon so post up to save your own!
     
  12. TamiJean

    TamiJean
    Expand Collapse

    625
    0
    266
    Location:
    Spokane, Wa
    sat at 1pm please
     
  13. 2 Wheel DynoWorks

    2 Wheel DynoWorks
    Expand Collapse

    526
    1
    268
    Location:
    Kirkland, Wa
    I Ride:
    motorbikes
  14. EmpireBob

    EmpireBob
    Expand Collapse

    143
    0
    186
    Location:
    Spokane, WA
    I have a customer, Jim from Canada, who would like the 2:00 slot on Saturday. He has a 2003 Triumph Sprint. Thanks for scheduling! - Bob
     
  15. Ryfly

    Ryfly
    Expand Collapse

    163
    0
    86
    Location:
    Spokane, WA
    I Ride:
    2006 GSX-R 1000
    Slot me in for Friday at 6 please. Ryan - 06 GSX-R 1000 tune. Thanks!
     
  16. ibeb

    ibeb
    Expand Collapse

    116
    0
    86
    Location:
    Spokane Valley, WA
    Nels - Can you get me down for 5:00pm on Friday please. Get the Busa dialed in and possibly ditch the PC-3 that's on there and just do an ecu tune. Thanks - Erik
     
  17. gergregg

    gergregg
    Expand Collapse

    7
    0
    51
    Location:
    Liberty Lake
    Nels,

    I have a question for you. I want to get the 2010 R1 done but I skipped on the power commander V and got the flash-tune interface which allows the end users to make changes to many of the same parameters as the ecu unleashed product and flash at will. Have you worked with the flash-tune system at all? The software can import PCV maps or create you own but I was hoping not to have to buy the PCV just for the tune, and import the file and then sell it.

    Thanks

    Matt
     
    #17 gergregg, May 17, 2012
    Last edited: May 17, 2012
  18. TamiJean

    TamiJean
    Expand Collapse

    625
    0
    266
    Location:
    Spokane, Wa
    Hey Nels, would it be possible to change to saturday at 3pm? Thanks
     
  19. 2 Wheel DynoWorks

    2 Wheel DynoWorks
    Expand Collapse

    526
    1
    268
    Location:
    Kirkland, Wa
    I Ride:
    motorbikes
    Updated! We need more people! :mfclap:
     
  20. Stillboredb

    Stillboredb
    Expand Collapse

    154
    0
    86
    Location:
    Spokane Valley
    Alex with the xs400 has to cancel, sorry. Might be able to get someone in his place though. Will keep you posted.
     
Loading...
Similar Threads Forum Date
9/11-13 Empire Cycle Dyno Weekend! Eastside Aug 21, 2015
Bike night at Empire Cycle Eastside May 27, 2015
Ladies night at Empire Cycle Eastside May 27, 2015
Empire Cycle Barbecue and New Demos Eastside Apr 29, 2015
Empire Cycle Open House Eastside Feb 25, 2015

Share This Page