Mega Moto at Evergreen Speedway in Monroe 9-22/23

Discussion in 'Track Time' started by Debi, Sep 10, 2012.


  1. Debi

    Debi
    Expand Collapse

    7,090
    1
    868
    Location:
    Renton, WA
    Come on out people... going to be super fun.

    Here is Evergreens post on FB

    Well superbikers is a reality. Megamoto is coming to Evergreen speedway Sept 22 & 23. The best of the northwest from MX, flat track and road racing. Beer garden, Live band and pit party. The track layout will be off the hook. Pro and amateur classes sat and sun.

    *****Event info coming very soon*****

    here is the track lay out per them so far.

    [​IMG]


    So get your Supermotos ready for some Bar Bangin fun boys and girls :mfclap:
     
  2. TheSumoBear

    TheSumoBear
    Expand Collapse

    1,727
    6
    343
    Location:
    wa
    Id love to do this. But I need peg and bar end sliders. And need to set up a catch can for fuel. Also quick question, are the stock axel sliders for a drz enough to pass tech? Also the stock coolant reservoir?
     
  3. Debi

    Debi
    Expand Collapse

    7,090
    1
    868
    Location:
    Renton, WA
    Yes to the coolant and sliders. You have a FCR?? if yes then yeah catchcan. I just sold my pegs that had the SME weld on sliders :( bar end sliders are easy :) peg sliders are easy too ;)
     
  4. nemisis714

    nemisis714
    Expand Collapse

    3,361
    0
    666
    Location:
    Kent, WA
    probably in (spectating)
     
  5. koorbloh

    koorbloh
    Expand Collapse
    Je Fa Fa

    19,782
    3
    1,768
    Location:
    Monroe-mish, WA
    I Ride:
    dirty bikes!
    been wanting to go watch for a long time...been working basically since I heard they were running bikes out there at all though :(

    hopefully I'll be able to make it to check it out.
     
  6. Grantizzle

    Grantizzle
    Expand Collapse
    Moderator
    Staff Member

    9,737
    0
    1,066
    Location:
    Mill Creek, Wa
    what exactly does one need to ride in this event?

    i have sliders on my bike.... but that's it. gear requirements?
     
  7. Debi

    Debi
    Expand Collapse

    7,090
    1
    868
    Location:
    Renton, WA
    I think your bike would be fine Grant, just remove mirrors, blinkers and tape up your lights ;)

    Gear IMHO I think what you have is good to go :)
     
  8. Debi

    Debi
    Expand Collapse

    7,090
    1
    868
    Location:
    Renton, WA
    Well... hope you can make it :mfclap:
     
  9. Grantizzle

    Grantizzle
    Expand Collapse
    Moderator
    Staff Member

    9,737
    0
    1,066
    Location:
    Mill Creek, Wa
    maybe i'll get some dirt pants/pads.... would my street boots suffice?
     
  10. Seattle

    Seattle
    Expand Collapse

    1,727
    2
    443
    Location:
    Renton
    hmmm...

    Not at 100% yet but sure do miss kicking your booty around the track...:devil:

    Wonder if Ryan could mock up a sumo tire and rim kit for DJ's 85 in trade for his 65 setup?
     
  11. TheSumoBear

    TheSumoBear
    Expand Collapse

    1,727
    6
    343
    Location:
    wa
    CE certified gear is what I've read. But I really dont know what that means.
     
  12. Debi

    Debi
    Expand Collapse

    7,090
    1
    868
    Location:
    Renton, WA
    Yeah, dirt gear with knee guards, and elbow guards are a good thing to use if you don't have leathers ;)

    Street boots would work but if the dirt is tuff you might want dirt boots.
    What size boot do you wear Grant??? I have some Tech 5's that are a 12 and tech 7's that are 11 or 12.. my sons boots. You are more than welcome to use them if they fit ya :mrgreen:
     
  13. Debi

    Debi
    Expand Collapse

    7,090
    1
    868
    Location:
    Renton, WA
    Yes... you are going on the 22/23 Cliffy hehe... hey, give ry ry a call ;)

    The Armour inside street gear ;)
     
  14. gullous

    gullous
    Expand Collapse

    178
    0
    186
    Location:
    Shoreline, WA
    Oh man, I'm totally in. What classes will they run? I'm on a 690...

    Man, that's road map looks dirt-biased... What tires would be favorable?
     
    #14 gullous, Sep 10, 2012
    Last edited: Sep 10, 2012
  15. Grantizzle

    Grantizzle
    Expand Collapse
    Moderator
    Staff Member

    9,737
    0
    1,066
    Location:
    Mill Creek, Wa
    lolol. debi, i wear a size 15. i haven't been able to find dirt boots that fit my feet and calves.... the only one that might work is the sidi crossfire.
     
  16. Cyndy

    Cyndy
    Expand Collapse

    3,706
    1
    766
    Location:
    Chicagoland
    +1
     
  17. NoQuarter#121

    NoQuarter#121
    Expand Collapse
    WMRRA #2 Overall Points Champion

    3 pins and 4 pieces of metacarpal...

    Otherwise I would so be down...

    I know Grandmas go good.

    But Grandpas may be soft, but we are very, very fast!

    Although if I was able, I would have to race WMRRA and continue the #121 domination
     
  18. TheSumoBear

    TheSumoBear
    Expand Collapse

    1,727
    6
    343
    Location:
    wa
    Stock carb. I'm a newb lol, no catchcan for my vaccume carb?
    Also, can I wear mx pants with asterisk knee braces?
     
  19. Grantizzle

    Grantizzle
    Expand Collapse
    Moderator
    Staff Member

    9,737
    0
    1,066
    Location:
    Mill Creek, Wa
    <---need help with catch can.
     
  20. gullous

    gullous
    Expand Collapse

    178
    0
    186
    Location:
    Shoreline, WA
    Does this pass tech? It's domestic :mrgreen:
    [​IMG]
     
Loading...
Similar Threads Forum Date
Mega Moto Monroe 9/20-23! Adventure Time Sep 19, 2012
DS ride to mega-moto Westside Sep 19, 2012
Mega moto - 9/22 evergreenmotocrosspark.com Westside Sep 14, 2012
OMEGA MC-1 Motorcycle Alarm Motorcycle Talk Dec 15, 2010
BMW HP2 Megamoto Scrambler Special Edition with Ohlins and Brembo Motorcycle Talk Apr 21, 2008

Share This Page